Fuel Pressure Relief Control Performance/Stuck Off
Pressure relief solenoid does not relieve pressure when commanded — stuck closed.
Affected components
- Pressure relief solenoid
Common causes
- High likelihood: Solenoid stuck closed by contamination
- Low likelihood: Carbon or debris buildup preventing free movement
- Low likelihood: Component wear with age - mechanical play
Possible symptoms
- Check engine light on
- Hard start, no start, or stalling under load
- Power loss especially at high load or rpm
- Possible long cranking time
Diagnostic notes
- The malfunction indicator lamp may illuminate
- This code can affect emissions
- A drive cycle may be required after repair
Sources
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.