Generator Torque Sensor Circuit High
The generator torque sensor reports a circuit high fault. Generator torque feedback is unreliable. Wiring faults of this kind typically come from chafing, water ingress at connector seals, or pin push-back — a wiggle test on the harness while the code is active often confirms the location.
Affected components
- Generator torque sensor
- Wiring harness
- Hybrid control module
Common causes
- High likelihood: Torque sensor failed
- Medium likelihood: Wiring fault
- Low likelihood: Connector pins corroded - high contact resistance
Diagnostic notes
- The malfunction indicator lamp may illuminate
- Reduced-power or limp mode may occur
Sources
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.