Drive Motor A Phase W Current Sensor Circuit Low
The current sensor for drive motor A phase W reports a circuit low fault. Phase current measurement is unreliable.
Affected components
- Drive motor a phase w current sensor
- Wiring harness
- Hybrid control module
Common causes
- High likelihood: Signal wire shorted to ground
- Medium likelihood: Internal sensor short
- Low likelihood: Connector pins corroded - high contact resistance
Possible symptoms
- EV/hybrid system warning light on
- Reduced motor power or torque
- Possible limp mode or vehicle shutdown
Diagnostic notes
- The malfunction indicator lamp may illuminate
- Reduced-power or limp mode may occur
Related codes
Sources
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.