Skip to content
P2564 Powertrain

Turbocharger Boost Control Position Sensor A Circuit Low

Position sensor A signal voltage below the lower limit — short to ground in the signal line or open reference voltage at the sensor.

Affected components

  • Turbo actuator position sensor a
  • Sensor wiring

Common causes

  • High likelihood: Signal wire shorted to ground
  • Medium likelihood: Missing 5 V reference at the sensor
  • Low likelihood: Connector pins corroded - high contact resistance

Possible symptoms

  • Charge status indicator shows fault
  • Charging may not start or interrupts
  • Slower-than-expected charge rate

Diagnostic notes

  • The malfunction indicator lamp may illuminate
  • This code can affect emissions

Related codes

Sources

Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.

You might like