Sensor Power Supply D Circuit Low
The 5 V supply rail D is below the expected level. Wiring faults of this kind typically come from chafing, water ingress at connector seals, or pin push-back — a wiggle test on the harness while the code is active often confirms the location.
Affected components
- Control module
- Sensor supply d
- Sensors on rail d
Common causes
- High likelihood: Reference wire shorted to ground
- Medium likelihood: Sensor on the rail shorted internally to ground
- Low likelihood: Connector pins corroded - high contact resistance
Diagnostic notes
- The malfunction indicator lamp may illuminate
Related codes
Sources
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.