Pressure Control Solenoid T Control Circuit/Open
The TCM detects an open circuit in the control wiring of pressure control solenoid T. No current flows when the solenoid is commanded.
Affected components
- Pressure control solenoid t
- Wiring harness
Common causes
- High likelihood: Open in solenoid control wire
- Medium likelihood: Open solenoid coil
- Low likelihood: Pin pushed back out of connector body
Diagnostic notes
- The malfunction indicator lamp may illuminate
- Reduced-power or limp mode may occur
Related codes
Sources
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.