Control Pilot Charging Switch B Circuit High
The control pilot charging switch B reports a circuit high condition. SAE J1772 charging signal handshake may be compromised.
Affected components
- Control pilot switch b
- Wiring harness
- Bms
Common causes
- High likelihood: Wire shorted to B+
- Medium likelihood: Switch open
- Low likelihood: Connector pins corroded - high contact resistance
Possible symptoms
- Charge status indicator shows fault
- Charging may not start or interrupts
- Slower-than-expected charge rate
Diagnostic notes
- The malfunction indicator lamp may illuminate
- Reduced-power or limp mode may occur
Related codes
Sources
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.