Invalid Data Received from Driver Assistance System
The Driver Assistance System is present on the data bus but the values it reports are implausible — out of range, frozen, or failing the checksum or rolling-count check. The receiving modules reject the data. Driver-assist features such as lane keeping or adaptive cruise are disabled. Causes include a faulty sensor feeding the module, internal computation errors, a software or calibration mismatch after a repair, or bus interference corrupting the frames.
Affected components
- Driver assistance module
- Can bus wiring
Common causes
- High likelihood: ADAS calibration lost (after windshield/bumper repair)
- Medium likelihood: Sensor obstructed (dirt, snow, sticker)
- Low likelihood: Gateway module routing CAN messages incorrectly
Possible symptoms
- Multiple warning lights may illuminate
- Affected modules may go into limp mode or shut down
- Specific functions inoperative depending on module
- Diagnostic tools may show communication faults
Diagnostic notes
- The malfunction indicator lamp may illuminate
Sources
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.