Hydrogen Tank C Valve Enable Circuit
Hydrogen Tank C Valve Enable Circuit: an electrical fault is present in the circuit.
Affected components
- H2 tank c valve enable
- Safety circuit
Common causes
- High likelihood: Enable wire open or relay failed
- Low likelihood: Gateway module routing CAN messages incorrectly
- Low likelihood: CAN terminating resistor (120 Ω) drifted out of spec
Possible symptoms
- Multiple warning lights may illuminate
- Affected modules may go into limp mode or shut down
- Specific functions inoperative depending on module
- Diagnostic tools may show communication faults
Diagnostic notes
- The malfunction indicator lamp may illuminate
- Reduced-power or limp mode may occur
Related codes
Sources
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.