4WD/AWD Range Actuator Position Sensor Circuit Low
4WD/AWD Range Actuator Position Sensor Circuit Low: the signal voltage is below the expected range. This affects engagement of the all-wheel-drive clutch.
Affected components
- Range pos sensor
Common causes
- High likelihood: Signal wire shorted to ground
- Low likelihood: Connector pins corroded - high contact resistance
- Low likelihood: Harness chafing through insulation
Possible symptoms
- ABS warning light on
- ESC/stability control deactivated
- Possible reduced brake assist
- Speedometer may behave erratically
Diagnostic notes
- The malfunction indicator lamp may illuminate
- Reduced-power or limp mode may occur
Sources
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.