Turbocharger/Supercharger Boost Control B Circuit Range/Performance
Boost control B mechanical/hydraulic deviation from target. Same as P0046 on actuator B. Boost control tracks commanded vs. actual manifold pressure; persistent deviation means wastegate, vanes, hose or actuator are not delivering the requested pressure.
Affected components
- Boost control solenoid b
- Wastegate b
Common causes
- High likelihood: Vacuum/boost line leak
- Low likelihood: Sensor element aged beyond calibration window
- Low likelihood: Sensor mounting loose - signal damping
Possible symptoms
- Charge status indicator shows fault
- Charging may not start or interrupts
- Slower-than-expected charge rate
Diagnostic notes
- The malfunction indicator lamp may illuminate
- This code can affect emissions
- A drive cycle may be required after repair
- Reduced-power or limp mode may occur
Related codes
Sources
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.