Exhaust Valve Control Solenoid Circuit High Bank 1
Exhaust valve solenoid bank 1 control voltage above expected range. Short to power or open ground. The exhaust control valve modulates exhaust backpressure or routing (EGR feed, sound, regen support); a malfunction shifts torque mapping and may trigger limp mode.
Affected components
- Exhaust valve solenoid
- Solenoid wiring
Common causes
- High likelihood: Wiring shorted to battery
- Low likelihood: Connector pins corroded - high contact resistance
- Low likelihood: Supply wire pinched against B+ source
Diagnostic notes
- The malfunction indicator lamp may illuminate
- This code can affect emissions
- A drive cycle may be required after repair
Related codes
Sources
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.