System Too Lean (Bank 2)
Same condition as P0171 but on bank 2 of a multi-bank engine (V6, V8, flat-six, etc.). When P0171 and P0174 appear together, the cause is usually a shared component such as the MAF sensor or a central vacuum leak rather than a bank-specific fault.
Affected components
- Intake manifold
- Mass air flow sensor
- Fuel pump
- Fuel pressure regulator
Common causes
- High likelihood: Central vacuum leak (intake manifold gasket, brake booster)
- High likelihood: MAF sensor contaminated
- Medium likelihood: Fuel pressure low (affects both banks)
Possible symptoms
- Check engine light on
- Rough idle, possible stalling
- Hesitation or hard cold start
- Power loss under load
Diagnostic notes
- The malfunction indicator lamp may illuminate
- This code can affect emissions
- A drive cycle may be required after repair
Related codes
Sources
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.