Throttle/Pedal Position Sensor/Switch B Circuit Intermittent
Intermittent signal from throttle position sensor B (electronic throttle systems use redundant sensors).
Affected components
- Throttle position sensor b
- Sensor wiring
Common causes
- High likelihood: Connector loose or corroded
- Low likelihood: Connector with intermittent contact under vibration
- Low likelihood: Harness routed against vibrating component
Possible symptoms
- Check engine light on
- Reduced throttle response, possible limp mode
- Hesitation or surging
- Idle too high or too low
Diagnostic notes
- The malfunction indicator lamp may illuminate
- This code can affect emissions
- A drive cycle may be required after repair
- Reduced-power or limp mode may occur
Related codes
Sources
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.