Cold Start EGR A Flow Insufficient Detected
During the cold-start strategy the ECU briefly opens EGR A to slow combustion temperatures and reduce engine-out NOx during catalyst light-off. The measured EGR flow stays below the calibrated target despite the requested opening - typically a stuck-closed valve, restricted cold-start path, or sensor offset that under-reports flow.
Affected components
- Egr valve a
- Egr cold start path
Common causes
- High likelihood: EGR valve A sticking closed when cold
- Medium likelihood: Cold-start EGR path restricted
Possible symptoms
- Check engine light on
- Pinging or knocking under load
- Power loss and hesitation
- Possible rough idle
- Failed emissions inspection (NOx)
Diagnostic notes
- The malfunction indicator lamp may illuminate
- This code can affect emissions
Related codes
Sources
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.