Ignorer et passer au contenu
P06AD Powertrain

Control Module Internal Temperature Sensor B Circuit Low

Same as P0668 on internal sensor B. Wiring faults of this kind typically come from chafing, water ingress at connector seals, or pin push-back — a wiggle test on the harness while the code is active often confirms the location.

Affected components

  • Ecu internal temperature sensor b

Common causes

  • High likelihood: Sensor internal short
  • Low likelihood: Connector pins corroded - high contact resistance
  • Low likelihood: Harness chafing through insulation

Possible symptoms

  • Check engine light on
  • Possible limp mode or no-start
  • Multiple follow-up faults across modules
  • Reset/relearn may be needed after repair

Diagnostic notes

  • The malfunction indicator lamp may illuminate

Related codes

Sources

Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.

You might like