Hybrid/EV Battery Positive Contactor Control Circuit High
The control circuit of the HV battery positive contactor reports a control circuit high condition. HV main switching cannot be commanded reliably.
Affected components
- Hv battery pos contactor
- Wiring harness
- Bms
Common causes
- High likelihood: Control wire shorted to B+
- Medium likelihood: Open contactor coil
- Low likelihood: Connector pins corroded - high contact resistance
Possible symptoms
- EV/hybrid system warning light on
- Reduced power output or limp mode
- Charging may fail or be slowed
- Reduced electric range
Diagnostic notes
- The malfunction indicator lamp may illuminate
- Reduced-power or limp mode may occur
Sources
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.