Motor Electronics Coolant Pump B Control Circuit Intermittent/Erratic
The motor electronics coolant pump B control signal drops out or jumps intermittently. Wiring faults of this kind typically come from chafing, water ingress at connector seals, or pin push-back — a wiggle test on the harness while the code is active often confirms the location.
Affected components
- Motor electronics coolant pump b
- Wiring harness
- Hybrid control module
Common causes
- High likelihood: Connector not seated
- Medium likelihood: Noisy ground reference
- Low likelihood: Connector with intermittent contact under vibration
Diagnostic notes
- The malfunction indicator lamp may illuminate
- Reduced-power or limp mode may occur
Related codes
Sources
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.