A Camshaft Position Actuator Control Circuit High (Bank 2)
The intake (A) camshaft phaser solenoid drive line on bank 2 is stuck high — short to B+ or open ground.
Affected components
- Camshaft position actuator
- Vvt solenoid
Common causes
- High likelihood: Short to B+
- Medium likelihood: Open ground return
- Low likelihood: Connector pins corroded - high contact resistance
Possible symptoms
- Check engine light on
- Power loss especially in mid-rpm range
- Possible rough idle or stalling
- Increased fuel consumption
Diagnostic notes
- The malfunction indicator lamp may illuminate
- This code can affect emissions
Related codes
Sources
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.