B Camshaft Position Actuator Control Circuit Low (Bank 2)
The exhaust (B) camshaft phaser solenoid drive line on bank 2 is stuck low — short to ground or stuck-low driver.
Affected components
- Camshaft position actuator
- Vvt solenoid
Common causes
- High likelihood: Short to ground
- Low likelihood: Connector pins corroded - high contact resistance
- Low likelihood: Harness chafing through insulation
Possible symptoms
- Check engine light on
- Power loss especially in mid-rpm range
- Possible rough idle or stalling
- Increased fuel consumption
Diagnostic notes
- The malfunction indicator lamp may illuminate
- This code can affect emissions
Related codes
Sources
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.