Throttle Actuator Control System — Stuck Open
The throttle plate cannot be commanded back to the closed/idle position. Idle speed runs high or the engine cannot decelerate properly — safety-critical fault that usually triggers immediate limp mode.
Affected components
- Throttle body
- Throttle actuator motor
- Throttle return spring
Common causes
- High likelihood: Throttle plate seized open
- Medium likelihood: Return spring broken
- Low likelihood: Carbon or debris buildup preventing free movement
Possible symptoms
- Check engine light on
- Reduced throttle response, possible limp mode
- Hesitation or surging
- Idle too high or too low
Diagnostic notes
- The malfunction indicator lamp may illuminate
- This code can affect emissions
- A drive cycle may be required after repair
- Reduced-power or limp mode may occur
Related codes
Sources
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.