Kick Down Switch Circuit High
Voltage on the kick-down switch line is above the expected window. Wiring faults of this kind typically come from chafing, water ingress at connector seals, or pin push-back — a wiggle test on the harness while the code is active often confirms the location.
Affected components
- Kickdown switch
- Wiring harness
Common causes
- High likelihood: Open switch contacts
- Medium likelihood: Switch wire shorted to B+
- Low likelihood: Connector pins corroded - high contact resistance
Diagnostic notes
- The malfunction indicator lamp may illuminate
Sources
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.