System Too Lean During Cylinder Deactivation Bank 2
During cylinder deactivation on bank 2, the fuel trim of the active cylinders runs persistently lean. Indicates unmetered air ingress or fuel delivery shortfall.
Affected components
- Fuel injectors
- Deactivation solenoids
- Intake system
Common causes
- High likelihood: Vacuum leak unmasked during deactivation
- Medium likelihood: Fuel rail pressure low
Possible symptoms
- Check engine light on
- Rough idle, possible stalling
- Hesitation or hard cold start
- Power loss under load
Diagnostic notes
- The malfunction indicator lamp may illuminate
- This code can affect emissions
- A drive cycle may be required after repair
Related codes
Sources
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.