Low Speed CAN Communication Bus (-) Open
CAN-Low on the low-speed comfort bus is open. The bus runs in single-wire fallback only; a fault is set because fault-tolerance is lost.
Affected components
- Low speed can wiring
Common causes
- High likelihood: CAN-Low wire broken
- Low likelihood: Gateway module routing CAN messages incorrectly
- Low likelihood: CAN terminating resistor (120 Ω) drifted out of spec
Possible symptoms
- Multiple warning lights may illuminate
- Affected modules may go into limp mode or shut down
- Specific functions inoperative depending on module
- Diagnostic tools may show communication faults
Diagnostic notes
- The malfunction indicator lamp may illuminate
Sources
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.