Lost Communication With Battery Isolation/Voltage Stabilization Control Module
The vehicle bus reports loss of communication with the battery isolation / voltage stabilization module (typical in start/stop systems). Cranking voltage stabilization and second-battery switching cannot be commanded.
Affected components
- Battery isolation module
- Vehicle bus wiring
Common causes
- High likelihood: Bus wiring open or shorted
- Medium likelihood: Module without power or ground
- Medium likelihood: Module failed
Possible symptoms
- Multiple warning lights may illuminate
- Affected modules may go into limp mode or shut down
- Specific functions inoperative depending on module
- Diagnostic tools may show communication faults
Diagnostic notes
- The malfunction indicator lamp may illuminate
- A drive cycle may be required after repair
Sources
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.