Intake Valve Control Solenoid Circuit Low Bank 2
Intake valve solenoid bank 2 control voltage below expected range. Short to ground or low-resistance fault.
Affected components
- Intake valve solenoid
- Solenoid wiring
Common causes
- High likelihood: Wiring shorted to ground
- Low likelihood: Connector pins corroded - high contact resistance
- Low likelihood: Harness chafing through insulation
Diagnostic notes
- The malfunction indicator lamp may illuminate
- This code can affect emissions
- A drive cycle may be required after repair
Related codes
Sources
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.