Alternative Fuel Rail Temperature Sensor Circuit Low
Alt fuel rail temp sensor signal voltage below expected range. Wiring faults of this kind typically come from chafing, water ingress at connector seals, or pin push-back — a wiggle test on the harness while the code is active often confirms the location.
Affected components
- Alt fuel rail temp sensor
- Sensor wiring
Common causes
- High likelihood: Signal wire shorted to ground
- Low likelihood: Connector pins corroded - high contact resistance
- Low likelihood: Harness chafing through insulation
Diagnostic notes
- The malfunction indicator lamp may illuminate
- This code can affect emissions
Sources
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.