Cylinder 3 Misfire Detected
Misfires concentrated on cylinder 3. A cylinder-specific code points away from shared causes (fuel pressure, MAF) toward components dedicated to that cylinder — coil, spark plug, injector, compression. Verify by swapping the suspected coil/plug to a different cylinder; if the code follows, the part is bad.
Affected components
- Ignition coil
- Spark plug
- Fuel injector
Common causes
- High likelihood: Ignition coil for cylinder 3 failed
- High likelihood: Spark plug for cylinder 3 worn or fouled
- Medium likelihood: Cylinder 3 injector clogged
Possible symptoms
- Check engine light on or flashing
- Rough idle and uneven running
- Power loss, hesitation under acceleration
- Increased fuel consumption
- Possible smell of unburned fuel from exhaust
Diagnostic notes
- The malfunction indicator lamp may illuminate
- This code can affect emissions
- A drive cycle may be required after repair
Related codes
Sources
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.