Stop-Start Mode Switch Circuit High
Same as P05BC with the signal shorted to supply. Wiring faults of this kind typically come from chafing, water ingress at connector seals, or pin push-back — a wiggle test on the harness while the code is active often confirms the location.
Affected components
- Stop start switch
Common causes
- High likelihood: Signal shorted to supply
- Low likelihood: Connector pins corroded - high contact resistance
- Low likelihood: Supply wire pinched against B+ source
Diagnostic notes
- The malfunction indicator lamp may illuminate
Sources
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.