Glow Plug Module Control Circuit
The control circuit between the engine controller and the glow plug control module reports a fault. The ECU can no longer reliably command the module that drives the glow plugs, so cold-start pre-heating may not run. On a diesel this causes hard starting, white smoke, and rough running until warm. Causes: open or shorted wiring between ECU and glow plug module, a failed module, or a power/ground fault at the module.
Affected components
- Glow plug module
- Module wiring
Common causes
- High likelihood: Glow plug control module faulty
- Medium likelihood: Wiring or connector fault
Possible symptoms
- Glow plug warning light on (often orange coil symbol)
- Hard cold start or no start in cold weather
- White smoke from exhaust during warm-up
Diagnostic notes
- The malfunction indicator lamp may illuminate
- This code can affect emissions
Related codes
Sources
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.