Pressure Control Solenoid L Control Circuit/Open
The TCM detects an open circuit in the control wiring of pressure control solenoid L. No current flows when the solenoid is commanded.
Affected components
- Pressure control solenoid l
- Wiring harness
Common causes
- High likelihood: Open in solenoid control wire
- Medium likelihood: Open solenoid coil
- Low likelihood: Pin pushed back out of connector body
Possible symptoms
- Check engine or transmission warning light on
- Harsh, delayed, or missing shifts
- Possible limp mode (locked in one gear)
- Slipping or shuddering during gear changes
Diagnostic notes
- The malfunction indicator lamp may illuminate
- Reduced-power or limp mode may occur
Related codes
Sources
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.