Pressure Control Solenoid B Control Circuit Range/Performance
Pressure control solenoid B does not perform within expected dynamic limits during commanded actuation. Wiring faults of this kind typically come from chafing, water ingress at connector seals, or pin push-back — a wiggle test on the harness while the code is active often confirms the location.
Affected components
- Pressure control solenoid b
- Valve body
Common causes
- High likelihood: Solenoid sluggish
- Low likelihood: Sensor element aged beyond calibration window
- Low likelihood: Sensor mounting loose - signal damping
Possible symptoms
- Check engine or transmission warning light on
- Harsh, delayed, or missing shifts
- Possible limp mode (locked in one gear)
- Slipping or shuddering during gear changes
Diagnostic notes
- The malfunction indicator lamp may illuminate
Related codes
Sources
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.