Shift Solenoid E Control Circuit/Open
The control circuit of shift solenoid E reports a control circuit/open condition. Gear element actuation cannot be commanded reliably on this channel.
Affected components
- Shift solenoid e
- Wiring harness
- Tcm
Common causes
- High likelihood: Open in solenoid control wire
- Medium likelihood: Open solenoid coil
- Low likelihood: Pin pushed back out of connector body
Possible symptoms
- Check engine or transmission warning light on
- Harsh, delayed, or missing shifts
- Possible limp mode (locked in one gear)
- Slipping or shuddering during gear changes
Diagnostic notes
- The malfunction indicator lamp may illuminate
- Reduced-power or limp mode may occur
Related codes
Sources
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.