Drive Motor B Position Sensor Circuit Intermittent
The drive motor B rotor position sensor reports a circuit intermittent fault. Phase commutation cannot be controlled reliably.
Affected components
- Drive motor b position sensor
- Wiring harness
- Hybrid control module
Common causes
- High likelihood: Connector not seated
- Medium likelihood: Noisy ground reference
- Low likelihood: Connector with intermittent contact under vibration
Possible symptoms
- EV/hybrid system warning light on
- Reduced motor power or torque
- Possible limp mode or vehicle shutdown
Diagnostic notes
- The malfunction indicator lamp may illuminate
- Reduced-power or limp mode may occur
Related codes
Sources
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.