Generator Phase U-V-W Circuit High
The generator phase U-V-W output reports a circuit high condition. Wiring faults of this kind typically come from chafing, water ingress at connector seals, or pin push-back — a wiggle test on the harness while the code is active often confirms the location.
Affected components
- Generator phase uvw
- Generator inverter
Common causes
- High likelihood: Phase wire shorted to high voltage
- Medium likelihood: Open winding
- Low likelihood: Connector pins corroded - high contact resistance
Diagnostic notes
- The malfunction indicator lamp may illuminate
- Reduced-power or limp mode may occur
Sources
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.