Cylinder 9 Pressure Sensor Circuit Low
Cylinder 9 pressure sensor below lower plausibility — short to ground. Wiring faults of this kind typically come from chafing, water ingress at connector seals, or pin push-back — a wiggle test on the harness while the code is active often confirms the location.
Affected components
- Cylinder pressure sensor 9
Common causes
- High likelihood: Sensor signal shorted to ground
- Medium likelihood: Sensor internal short
- Low likelihood: Connector pins corroded - high contact resistance
Diagnostic notes
- The malfunction indicator lamp may illuminate
- This code can affect emissions
Related codes
Sources
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.