Throttle Position Output Circuit High
The buffered throttle position output is above the expected level. Typical causes are a short to battery or an open output stage.
Affected components
- Control module
- Signal output buffer
- Wiring harness
Common causes
- High likelihood: Output wire shorted to B+
- Medium likelihood: Output buffer open
- Low likelihood: Connector pins corroded - high contact resistance
Possible symptoms
- Check engine light on
- Reduced throttle response, possible limp mode
- Hesitation or surging
- Idle too high or too low
Diagnostic notes
- The malfunction indicator lamp may illuminate
Sources
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.