Park Lock/Pawl Actuator Circuit/Open
The control wiring of the park lock or pawl actuator is open. No current flows when the actuator is commanded.
Affected components
- Park lock actuator
- Park pawl
- Wiring harness
Common causes
- High likelihood: Open in actuator control wire
- Medium likelihood: Open actuator coil
- Low likelihood: Pin pushed back out of connector body
Diagnostic notes
- The malfunction indicator lamp may illuminate
- Reduced-power or limp mode may occur
Sources
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.