Cold Start Fuel Pressure Regulator A Exceeded Control Limits - Pressure Too Low
During cold start, fuel pressure regulator A cannot maintain commanded pressure - actual rail pressure drops below the calibrated lower limit.
Affected components
- Fuel pressure regulator a
- Fuel rail
Common causes
- High likelihood: Leak in fuel rail or injector
- Medium likelihood: Regulator stuck open at cold start
Possible symptoms
- Check engine light on
- Hard start, no start, or stalling under load
- Power loss especially at high load or rpm
- Possible long cranking time
Diagnostic notes
- The malfunction indicator lamp may illuminate
- This code can affect emissions
- A drive cycle may be required after repair
Sources
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.