Cylinder 2 Deactivation Stuck Off
The engine control module has detected that cylinder 2 deactivation hardware is stuck in the off state. The deactivation cannot be released when full-cylinder operation is commanded.
Affected components
- Cylinder deactivation solenoid
- Lifter
Common causes
- High likelihood: Lifter stuck collapsed
- Medium likelihood: Solenoid stuck
- Low likelihood: Carbon or debris buildup preventing free movement
Diagnostic notes
- The malfunction indicator lamp may illuminate
- This code can affect emissions
- A drive cycle may be required after repair
Related codes
Sources
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.