B Camshaft Position Actuator Position Sensor A Range/Performance Bank 1
Position sensor of exhaust cam actuator on bank 1 reads implausibly compared to commanded position. The camshaft position sensor identifies which cylinder is on the compression stroke — without it the ECM cannot run sequential injection or coil-on-plug ignition correctly.
Affected components
- Cam actuator b pos sensor b1
Common causes
- High likelihood: Sensor reading drifted
- Low likelihood: Sensor element aged beyond calibration window
- Low likelihood: Sensor mounting loose - signal damping
Possible symptoms
- Check engine light on
- Power loss especially in mid-rpm range
- Possible rough idle or stalling
- Increased fuel consumption
Diagnostic notes
- The malfunction indicator lamp may illuminate
- This code can affect emissions
- A drive cycle may be required after repair
Related codes
Sources
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.