Lost Communication with Mirror Memory Module
The Mirror Memory Module has stopped transmitting on the vehicle data bus, so other control units no longer receive its messages. Memory mirror positioning stops working. Typical causes are loss of power or ground at the module, an open or shorted CAN/LIN bus wire, a connector fault, or an internal module failure.
Affected components
- Mirror memory module
- Can bus wiring
Common causes
- High likelihood: Mirror module unpowered
- Medium likelihood: CAN wiring to mirror module broken
- Low likelihood: Gateway module routing CAN messages incorrectly
Possible symptoms
- Multiple warning lights may illuminate
- Affected modules may go into limp mode or shut down
- Specific functions inoperative depending on module
- Diagnostic tools may show communication faults
Sources
Diagnostic information is provided for reference only. Confirm the code with a compatible scan tool and follow the vehicle manufacturer's service procedures before replacing components.